3Ax3 Brushed ESC Two-way Mixed Control Speed Controller RC Tank 7.4v -11.1v

Description

Description:
Quantity:1pc
3Ax3 Brushed ESC two-way mixed control Speed Controller RC Tank 7.4v -11.1v
Electric current :3Ax3
Voltage :2s,3s
Size:30mmx25mm
Features : two-way ,mixed control, Differential turning
(The motor can rotate forward and backward, and the tank can retreat.)
3S high voltage motor has more power than 2S. If you need more torque, please use this adjuster.
This electric regulation upgrades the single chip computer, smoothes the input signal; in order to give the user a better hint, the motor rings when the power is on, and the unlock rings twice.
3A per route, peak 5A
Location fixed PWM 1500us (+50-50) in remote control, minimum run 800-1100 and maximum 1900-2200 automatic adaptation, more than considered as signal loss, motor lock.
Start with median point (throttle channel 1500, can hear the motor "Doodle", electrically adjustable start)
With out-of-control protection (loss of signal (in the accident, the signal line is broken), in order to be safe and motor protection, it is necessary to return the throttle to the middle and re-unlock.
(Run distance less than 970us, higher than 2200us are considered as signal loss, electric lock)
Electric regulation has certain overload and overheat protection
Plate size: 33x24mm
Each set of motor wires directly connected to the motor, do not confuse, otherwise it will damage the electrical regulation.
(Electric dispatch factory will shrink well and pack in static bag)
(Sliding button mixed control inward 1-2 channels, outward 1-2-3 channels independent)
On the inconsistency of the rotational speeds of two motors
As long as the steering is in the middle position (PWM 1500us), the dual output of the electric regulation is the same, because the duty cycle can be controlled accurately by the single chip computer. You can not insert a single yellow line (equivalent to turning failure, this is the dual synchronous mode), if the output is inconsistent, it is mostly motor, wave box or crawler inconsistent, can be used to mitigate turning fine-tuning.
Someone asked: not with out-of-control protection, why do I turn off the motor?
This is because when you turn off the receiver will output a low throttle signal. Low throttle is backward for power regulation, and full speed backward.
After shutdown, the receiver automatically outputs low throttle signal, also known as out-of-control protection.
There are three solutions
1) The throttle is connected to 2 channels, and the 2 channels out of control protection is generally 1 500 (if not, please set up), indicating stop.
2) According to the standard process, switch off the model power supply before the remote control power supply.
3) If you use 3 channels, set the 3 channels out of control protection to 1500
Payment Policy :
We only accept payments via PayPal.
Shipping Time & Method:
Item will be shipped within 3 days after payment is confirmed. Goods will be sent via airmail .
Delivery takes about 18-25 day (without holidays). All products have been checked and packaged in good condition before dispatch.
Please make sure your address in PayPal is matched with your shipping address before pay. If you would like to change the address, please contact us IMMEDIATELY after your payment.
Return policy :
After receiving item. 30 days can return Items must be the original packaging. No use. No damage. Buyers bear the freight cost.