COSTACOAT Prep-Cleaner 1 Quart (32 fl.oz.) Removes Wax, Dirt & Loose Oxidation

Description

1 Quart
(32fl.oz. ) bottle of
CostaCoat Prep-Cleaner
.
CostaCoat Prep-Cleaner is used to prepare surfaces for the use of CostaCoat Wipe-On Clear Coat Sealer & Protectant.
This
Prep-Cleaner
is to be used to prepare Gel Coat, Fiberglass, or Painted surfaces and has been formulated to remove old wax, polish, grease, oils and loosen oxidation.
This product is a cleaner/wash and should be rinsed very well, preferably by a pressure washer should you have one available
This product is highly concentrated and should be diluted with water, anywhere from 4 to 6 parts water to 1 part Prep-Cleaner...So, 1 quart of Prep-Cleaner can make a total of approximately 7 quarts (recommended) to 5 quarts (for very dirty and highly oxidized surfaces).
In my auction photos, I have shown a 1 Qt. bottle of our Prep-Coat solution, which is what you will be purchasing here.  I have also shown three photos of an electrical transformer box, before it was touched, once half of it was cleaned with CostaCoat Prep-Cleaner and the last photo of the area that was properly prepared with CostaCoat Prep-Cleaner, after that same area has been coated with our CostaCoat Wipe-On Clear Coat Sealer & Protectant.
There is enough Prep-Cleaner in 1 Quart to prepare about 75 square feet of very dirty and oxidized surface.
CostaCoat Prep-Cleaner should only be used as the first step in this system and should never be used as a general purpose cleaner once CostaCoat Wipe-On Clear Coat has been applied.
Note: using this Prep-Cleaner on CostaCoat Wipe-On Clear Coat will dull and even remove our clear coat coating.
Always follow up by applying CostaCoat Wipe-On Clear Coat, for protection and shine!
Please note: We sell the COSTACOAT Wipe-On Clear Coat in a KIT form (all kits include Prep-Cleaner)...We highly suggest that if this is your first time using COSTACOAT, that you purchase a KIT.