Gyroscope Balance Two-way ESC Dual Motors Mixed Control Differential Turning

Description

Description:
Quantity:1pc
gyroscope balance Two-way ESC dual motors mixed control Differential turning .
Suitable for dual motors: RC Boat, Tank, Tracked ,Vehicle .
This product is aimed at dual motor controlled vehicles and boats, which can reduce the trouble of setting up mixed control on remote controller and increase stability with gyroscope. This is an upgraded version of our previous mixer.
You can use this device to test the effect of a vehicle or ship which is extremely flexible and difficult to control.
Sensitivity can be adjusted by 5/6-way (blue line) or by knob on board. The remote control is preferred. When the blue line is not connected, the knob on the board will take effect.
(5/6 universal knob, do not use 2/3 switch for precise adjustment of sensitivity)
Usage method:
Connect wiring according to wiring diagram and power on
Keep the model stationary, blue LED bright, model in automatic calibration gyroscope within 2 seconds after power-on
Then it can be used normally, adjust 5/6 channels, and adjust the sensitivity to a comfortable position.
Enjoy your use!
Emphasize:
1) The gyroscope will control the motor rotation (at any time, to ensure the safety of motor rotation, the propeller should be placed in the cage, to ensure absolute personal safety)
2) Gyroscopes do not guarantee absolute alignment of the vehicle and ship, but they can walk more straight and allow you to better control the model.
Parameters:
Voltage: 3.6-5.5v
Plate size: 30x20mm
The ratio of speed difference mixed control is
The 1-way ratio is 100% (usually throttle)
The ratio of two routes is 100% (usually turning)
Turn first; value range limited to 1000-2000us
Matters needing attention:
1) The direction is reversed. What should we do?
Set the inductance to 0 to confirm that the motor forward/backward is right, if not, the + - connection behind the switch motor
Operate in the direction. If the direction is reversed, set the remote control in the opposite direction.
Increase the sensitivity to 50%, shake the model horizontally, and observe if the regulation is reversed. If it is reversed, switch the mixer on and adjust the two sockets.
2) If the direction channel fine-tuning operation is large, please re-energize and let the mixer re-calibrate the median point.
Payment Policy :
We only accept payments via PayPal.
Shipping Time & Method:
Item will be shipped within 3 days after payment is confirmed.
Goods will be sent via airmail .
Delivery takes about 18-25 business day (without holidays).
All products have been checked and packaged in good condition before dispatch.
Please make sure your address in PayPal is matched with your shipping address before pay. If you would like to change the address, please contact us IMMEDIATELY after your payment.
Return policy :
After receiving item.,items can be returned within 30 days .
Items must be the original packaging.
No use. No damage.
Buyers bear the freight cost.