Pettit Trinidad HD Hard Antifouling Red Bottom Paint - Gallon 1671G

Description

Other
Pettit Trinidad HD Hard Antifouling Red Bottom Paint - Gallon 1671G
Product SKU:
PET-1671G
Item Condition:
New
MSRP
6.99
Sale Price
7.99
Product Description:
Pettit Trinidad HD Hard Antifouling Bottom Paint
Pettit Trinidad HD Hard Bottom Paint provides excellent, long-lasting protection under the toughest antifouling conditions. Not only does this paint provide dependable in-water antifouling protection, but it also meets the 330 gram per liter VOC regulations. Trinidad HD does not require movement and works equally as well at the dock or underway. Its durable hard modified epoxy finish has excellent adhesion and is highly abrasion resistant. Trinidad provides multi-season protection and is a great choice for powerboats and sailboats in tropical and other warm waters where extreme fouling exists. This paint is compatible over most hard antifouling finishes and can be applied via brush, roller, or spray.
Pettit Trinidad HD provides excellent antifouling protection and is backed by the industry's strongest limited warranty. Pettit's Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Trinidad HD offers the most dependable and trusted antifouling protection in the industry.
Features:
Multi-season protection
Fast-dry technology
High copper load offers excellent performance in all conditions
Excellent adhesion to fiberglass, wood, and steel hulls
Hard, durable, finish for long lasting performance
Covered by HD (Hull Defense) 18 Month Limited Warranty
Specifications:
Pack Size: 1 US Gallon
Finish: Flat
Recommended Usage: All fouling waters
Colors Available: 1271 Blue, 1671 Red, 1871 Black
Drying Time: To overcoat 2hrs; To launch; 4hrs. @ 70°F
Number of Coats Recommended: 2
Coverage: 450 ft2/gal
VOC: 330 grams/liter
Biocide: Cuprous Oxide 53.3%
Associated Products:
Pettit Protect Epoxy Primer
- Primer for bare fiberglass applications
Pettit 92 Bio-Blue Hull Surface Prep
- For bare fiberglass applications
How to Apply Pettit Trinidad HD Bottom Paint
Pettit Trinidad HD Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap (maximum 1/4" nap) roller cover. Over-application will virtually assure inadequate coating performance. Mix paint thoroughly to ensure ingredients are evenly dispersed throughout the can. Follow all surface preparation instructions to ensure proper coating performance. Trinidad HD should not be applied to aluminum hulls or outdrives.
Application Methods:
Brush, roller, airless or conventional spray
Number of Coats:
2
Dry Film Thickness: 2
mils (3.4 wet mils)
Coverage:
450 sq. ft/gal.
Application Temp:
40°F Min. / 90°F Max.
Thinner:
120 VOC Thinner
DRY TIMES:
Temp
To Recoat
To Launch
90°F
1 HR
2 HR
70°F
2 HR
4 HR
50°F
12 HR
24 HR
Application Systems
Previously Painted Surfaces
Trinidad HD can be applied over most aged hard antifouling coatings.
If previous paint is in good condition, sand painted surface with 80 grit sandpaper.
Solvent clean with 120VOC Thinner to remove residue.
Apply two finish coats of Trinidad HD.
If previous coating is soft or in poor condition, remove to the bare surface by sanding or using paint remover.
Proceed with appropriate bare system.
Bare Fiberglass
All bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:
Sanding Method:
Sand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120VOC Brushing Thinner.
Apply two coats of Trinidad HD.
Non-Sanding Method:
Thoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.
Rinse all residue from surface and let dry.
Apply one coat of Pettit Protect Epoxy Primer 4700/4701 following primer label instructions.
Apply two or three coats of Trinidad HD.
Barrier Coat
Prepare the fiberglass surface as mentioned above (sanding method).
Apply two to three coats of Pettit Protect Epoxy Primer per label instructions.
Apply two or three coats of Trinidad HD.
Bare Wood
Sand thoroughly with 80 grit sandpaper and wipe clean.
Apply a coat of Trinidad HD thinned 25% with Pettit 120VOC Thinner.
Allow an overnight dry then lightly sand and wipe clean.
Apply two finish coats of Trinidad HD.
Steel Hulls
Clean surface to remove grease and dirt.
Remove loose rust and scale from the metal surface by scraping or sandblasting.
Blow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.
Follow with two coats of Pettit 4700/4701 Epoxy Primer.
Apply two or three finish coats of Trinidad HD.
Do not use Pettit Trinidad HD on aluminum hulls and outdrives.
Click to Download Pettit Trinidad HD Bottom Paint Application Instructions
About Us
Wholesale Marine is an on line boating store founded to provide customers an easy way find top-quality products at the lowest prices. With associates who possess decades of combined boating experience, Wholesale Marine can truly provide expert customer service.
Shipping Method
Wholesale Marine currently ships all merchandise UPS or truck freight. All orders with in-stock items placed by 2:00 PM EST Monday - Friday are shipped that same day. Orders placed after 2:00 PM on Friday and orders place on Saturday and Sunday will ship on the following Monday. Orders that qualifying for free shipping may be shipped  any method and carrier chosen by Wholesale Marine.  Free shipping offers are only valid within the continental U.S.
There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives.
*Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control.
Returns
Wholesale Marine will gladly refund almost any merchandise within 30 days from original purchase date. To return just send merchandise prepaid, in its original unused condition. Please include a copy of original Wholesale Marine invoice. We will then refund the merchandise amount by the original payment method. Shipping costs are not refundable. No returns for special order items, electronics, cut lengths of material or hazardous materials, such as but not limited to paint, oil, resins and adhesives.
Please ship all Returns to:
Wholesale Marine
147 Circle Freeway Drive
Cincinnati, OH 45246
Connect with Us
Find us on:
Powered by SixBit's eCommerce Solution